Connection technology

Application

90° connection of profiles

• 40×40: 1 pc. V-40
• 40×80: 2 pcs. V-40
• 40×80: 2 pcs. V-40-E
• 80×80: 4 pcs. V-40-E

Material

Zinc die-cast coated

Set V-40

2x IBS M6x18
1x V-40-G
1x LKS M8x25
2x NM-M6

Set V-40-E

1x IBS M6x18
1x V-40-G
1x LKS M8x25
1x NM-M6

*like V-40 and V-40-E, but with additional connecting pin (VS-40/50) made of stainless steel

Application

Fastening of panel elements and additional components

Code: W-35/25
Weight: 12 g

Material

Aluminium F25, natural anodized

Application

For vibration-free, non-projecting connections under minimum forces,
e.g. rack or shelf construction for light to medium-heavy applications

Code: VL-40
Weight: 48 g

Material

Galvanized steel

Set

1x VL-40-G
1x VL-40-SKS
2x NM-M6 SPZ01
2x IBS-M6x14

Note

Not suitable for cantilevered connections (only for closed frames); see technical information at the end of this chapter for load specifications

Application

• 50×50: 1 pc. V-50
• 50×100: 2 pcs. V-50 or V-50-E
• 100×100: 4 pcs. V-50-E

Material

Zinc die-cast coated

Set V-50

2x IBS-M8x18
1x V-50-G
1x LKS-M10x30
2x NM-M8

Set V-50-E

1x IBS-M8x18
1x V-50-G
1x LKS-M10x35
1x NM-M8

*like V-50 and V-50-E, but with additional connecting pin

Connector-40 for steel groove profile

Application

90° connection of steel groove profiles
Attention: Cross holes d=5.5 and 10 are drilled using the BS-40-ISZ drilling template

Code: V-40-S
Weight: 74 g

Material

Galvanized steel

Set

1x V-40-S-G
1x GE-40-SG
1x LKS-M8x20
1x LKS-M5x10

Application

Panel connector for 40×40 profiles; for attachment to BÖMA profiles

• Butt joint 40×40: 2 x AV-40
• Butt joint 40×80: 4 x AV-40
• Butt joint 80×80: 8 x AV-40
• 40×40 on flat surface: 1 x AV-40
• 40×80 on flat surface: 2 x AV-40
• 80×80 on flat surface: 4 x AV-40

Code: AV-40
Weight: 125 g

Material

Coated zinc casting

Set

1x AV-40-G
1x LKS-M8x25
2x IBS-M6x22
2x SKM-M6

Note

Connectors in various angles available on request.

Application

Panel connector for 20×40 profile; for attachment to BÖMA profiles

Code: AV-20×40
Weight: 53 g

Material

Natural anodized aluminium

Set

1x AV-20×40-G
2x IBS-M5x25
1x IBS-M6x20
2x ZS-4×14
1x NM-M6

Application

• 90° connection from 40×40-K curved profile to grid 40
• For plate mounting: lower diameter =9

Code: AV-40-K
Weight: 72 g

Material

Aluminum coated

Set

1x AV-40-KG
1x LKS-M8x25
1x IBS-M6x18
1x SPS-5×20
1x NM-M6

Application

Panel connector for 50×50 profiles; for attachment to BÖMA profiles

• Butt joint 50×50: 2 x AV-50
• Butt joint 50×100: 4 x AV-50
• Butt joint 100×100: 8 x AV-50
• 50×50 on flat surface: 1 x AV-50
• 50×100 on flat surface: 2 x AV-50
• 100×100 on flat surface: 4 x AV-50

Code: AV-50
Weight: 126 g

Material

Aluminum coated

Set

1x AV-50-G
1x SKS-M10x30
2x IBS-M8x18
1x SPS-8×20

Note

Connectors in various angles available on request

Application

Construction of lightweight doors up to approx. 1000 x 1000 mm;
Corner connection of 20×40 profiles;
5 mm thick panel elements can be framed in the frame without reworking;
Size = clear dimension + 16 mm

Code: V-20×40
Weight: 83 g

Material

Natural anodized aluminum

Set

1x V-20×40-G
2x IBS-M5x18
2x ZS-4×14
2x V-20×40-AK

Corner connector-40 for curved profile 40×40-K

Application

Corner connection of three 40×40-K profiles

Code: V-40-K
Weight: 109 g

Material

• Zinc die casting
• Plastic PA-6 black

Set

1x V-40-KG
1x AK-40-K
3x LKS-M8x25

Application

• 90° angle connections between profiles
• Fastening panels and additional elements

Code: W-40/50
Weight: 196 g

Material

• Zinc die-cast coated
• Steel investment casting
• Galvanized steel

Set

1x W-40/50-G
2x W-40/50-E
2x IBS-M8x16
2x NM-M8

Application

Stable 90° connections for profiles;
Cross mounting only possible with 50 mm grid;

Code: W-100
Weight: 597 g

Material

• Zinc die-cast coated
• Galvanized steel

Set

1x W-100-G
4x IBS-M8x20
4x NM-M8

Application

Stable 90° connections for profiles; attachment of solid panels;
Cross mounting only possible with 50 mm grid;
Centering only possible on one side of the bracket

Code: W-100-F
Weight: 524 g

Material

• Zinc die-cast coated
• Galvanized steel

Set

1x W-100-GF
4x IBS-M8x20
2x NM-M8

Application

Reinforcement of corner joints in a 40 and 50 mm grid

Material

Galvanized steel

Application

Stiffening of T-joints in 40 and 50 mm increments

Material

Galvanized steel

Application

• Connection of profile frames, preferably for protective fence construction
• Gap between 40 mm profiles 0 -10 mm incl. predetermined bending point in the middle of the panel

Code: VP-40
Weight: 132g

Material

Galvanized steel

Set

1x VP-40-G
2x NM-M8
2x IBS-M8x16

Connection plate-40 captive with simple quick fastening

Application

Connection plate with two locking screws for captive connections of elements and reduction of assembly times by fastening with 90° rotation incl. Allen screw M8x14 and swivel nut M8

Code: VP-40-UV-D
Weight: 131 g

Material

Galvanized steel

Connection plate-40 captive with simple quick fastening

Application

Connecting plate with a locking screw for captive connections of elements and reduction of assembly times by fastening with 90° rotation incl. M8x14 Allen screw and M8 swivel nut

Code: VP-40-UV-E
Weight: 111 g

Material

Galvanized steel

Application

• Sliding nut with extremely high strength
• for insertion into the groove at the front
• Easy to move, e.g. for adjusting devices

Material

Galvanized steel

Application

• Fastening sliding panels
• Centering groove for customer-specific holes on the underside

Code: SMS
Weight: 1108 g

Material

• Galvanized steel
• Rod length 1000 mm

Note

Drilling possible on customer request according to drawing

Application

Frame connector 40 for the construction of 40 mm profile frames when using panel elements that are framed with KP-40/50

Code: RV-40
Weight: 31 g

Material

Galvanized steel

Set

1x RV-40-G
1x RV-40-S
2x GSS-M6x8

Note

Not suitable for cantilevered connections (only for closed frames); see technical information at the end of this chapter for load specifications

Application

Drill connector for fastening panel elements to 40/50 mm profiles

Material

Galvanized steel

Application

• Adjustable angle connection (-90° to +90°)
• Installation in 40 mm grid at the front of the profile
• Installation in 40 and 50 mm grid in the longitudinal groove
• Attachment to surfaces possible by breaking out the centerings

Material

Coated cast aluminium, natural aluminium, galvanized steel

Set

1x G-40-R
2x G-40-G
2x SKS-M8x16
2x SKS-M8x20
2x NM-M8

*like G-40, but with clamping lever (G-40-KH) instead of SKS-M8x16

Application

• Slot nut for swiveling into 14 mm slots with finger or with BÖMA ED-Mx screwdriver
• Sliding in the groove with tongue as locking device

Material

High-strength galvanized steel

Set

1x NM-Mx-G
1x NM-F

Note

Screwdriver ED for NM see index

Application

• Connection of butt joints in 40 and 50 mm increments with obliquely drilled threads,
  to clamp profiles together
• Profile extension

Code: SV-40/50
Weight: 167 g

Material

Galvanized steel

Set

1x SV-40/50-G
6x GS-M8x12-S

Application

Threaded insert for steel groove profile 40×40-S with M8x20 thread; attachment of panels and various attachments such as connector V-40, joint G-40, connection connector AV-40, drill connector BV-40-M8

Attention: A cross hole d=5.5 mm is drilled using the BS-40 drilling template

Code: GE-40-S
Weight: 48 g

Material

Galvanized steel

Set

1x GE-40-SG
1x LKS-M5x10

Application

Auxiliary tool for easy insertion of the locknuts in all installation positions; Screw the locknut onto the driver; Swivel into the groove clockwise under slight pressure; The locknut is now secured against twisting; Loosen the driver by pulling it slightly counterclockwise

Material

• Plastic PAS – black
• Galvanized steel