Linear technology - variety of combination options

Our modular design allows a wide range of combination options. Depending on the project, plastic roller, steel roller or recirculating ball bearing guides are used.

Linear technology - Accessories

Cover-100 for LRS-50 simple

Application

Cover made of black plastic for track roller LRS-50 single; incl. felt wiper and fastening material.

Code: AD-100
Weight: 214 g


Set

1x AD-100-G
2x SKS-M6x70
1x FZB-50-G
1x FZD-50-G
1x GS-M4x16
1x NM-F

Cover-200 for LRS-50 double

Application

Cover made of black plastic for track roller LRS-50 double; incl. felt wiper and fastening material.

Code: AD-200
Weight: 438 g


Set

1x AD-200-G
4x SKS-M6x70
2x FZB-50-G
2x FZD-50-G
2x GS-M4x16
2x NM-F

Guide shaft-15 mm for linear axes with steel rollers

Application

Guide shaft for pressing into BÖMA aluminum profiles in 40 and 50 mm increments

Code: FW-15-[length in mm]
Weight: 1378 g/m
Material: Hardened and ground round steel, bar length 6000 mm

Initiator for linear axes-M12x1

Application

Initiator M12x1 for position signal on linear axes

Code: I-M12x1 Initiator
I-KWS-5 Angle plug with 5 m cable
Weight: 187 g


Technical data

N/O contact PNP DC with LED
Switching distance for steel:
4 mm
Insertion length: 35 mm
Total length: 60 mm

 

Note

Roller limit switch etc. on request

Initiator holder-50 mm for linear axes

Application

Holder for initiator I-M12x1

Code: IH-50
Weight: 85 g
Material: steel coated 1.5 mm


Set

1x IH-50-G
2x IBS-M6x12
2x NM-M6

Roller for LAS-50/100 with steel guide/eccentric

Application

Roller set for LAS-50/100 incl. ball-bearing steel roller with eccentric roller holder and mounting material

Code: LRS-50-E
Weight: 524 g


Set

1x LRS-50-G
1x RH-50-E
1x IBS-M10x70
1x BS-M10

Roller for LAS-50/100 with steel guide/centric

Application

Roller set for LAS-50/100 incl. ball bearing steel roller with centric roller holder and mounting material

Code: LRS-50-Z
Weight: 497 g


Set

1x LRS-50-G
1x RH-50-Z
1xIBS-M10x70
1x BS-M10

Roller for LAP-50/100 with plastic roller/eccentric

Application

Roller set for LAP-50/100 incl. ball bearing plastic roller with eccentric roller holder and mounting material

Code: LRP-50-E
Weight: 496 g


Set

1x LRP-50-G
2x bearing 6804-2RS
1x IBS-M10x70
1x DSL-50
1x DSR-50
1x RH-50-E

Roller for LA-50/100 with plastic roller/centric

Application

Roller set for LAP-50/100 incl. ball bearing plastic roller with centric roller holder and mounting material

Code: LRP-50-Z
Weight: 464 g


Set

1x LRP-50-G
2x bearing 61804-2RS
1x IBS-M10x70
1x DSL-50
1x DSR-50
1x RH-50-Z

Motor flange plate for ULK-50 and 040 gear motor

Application

Gear motor mounting

Code: MFP-50-040
Weight: 580 g
Material: galvanized steel


Note

Special sizes on customer request after specification of bolt circle and thread diameter

Toothed belt tensioner-50 for linear axes

Application

Toothed belt tensioner for toothed belt ZR-T10-32

Code: ZRS-50
Weight: 245 g
Material: natural aluminum, galvanized steel


Set

1x ZRH-50-G
2x IBS-M6x70
1x ZRS-50-G
3x ZRB-50-G
2x SPS-6×20
1x IBS-M8x20

Clamping coupling for ULK-50 - 20 mm

Application

Coupling for shafts with diameter 20 for drive resp. synchronization of BÖMA linear axes

Code: SK-50-20
Weight: 130 g
Material: steel nitrided


Set

1x SK-50-AR
1x SK-50-GR
1x SK-50-K
6x IBS-4×25

 

Note

Other shaft diameters on request

Deflection head for LA-50/100

Application

Deflection or drive head for toothed belt driven linear axes

Code: ULK-50
Weight: 1967 g
Material: natural aluminum, galvanized steel

Connector-50 mm for linear axis

Application

  • Connection for fastening of deflection heads on profiles in 50 mm increments
  • Two pieces are required per deflection head

Code: V-50-LA
Weight: 164 g/m
Material: Zinc die-cast coated

 

Set

1x V-50-LA-G
1x IBS-M8x16
1x LKS-M10x30
1x NM-M8-G

Trolley for LAP-50

Application

Complete carriage for LAP-50 with two eccentric and two centric plastic rollers

Code: WPP-50
Weight: 3365 g

 

Set

1x WP-50-G
2x LRP-50-Z
2x LRP-50-E

 

Note

Mounting holes are made according to customer requirements

Trolley for LAP-100

Application

Complete carriage for LAP-100 with two eccentric and two centric plastic rollers

Code: WPP-100
Weight: 3893 g

 

Set

1x WP-100-G
2x LRP-50-Z
2x LRP-50-E

 

Note

Mounting holes are made according to customer requirements

Trolley for LAS-50

Application

Complete carriage for LAS-50 with two eccentric and two centric rollers for steel guide, felt wiper, cover and fastening set

Code: WPS-50
Weight: 4365 g

 

Set

1x WP-50-G
2x LRS-50-Z
2x LRS-50-E
2x AD-200

 

Note

Mounting holes are made according to customer requirements

Trolley for LAS-100

Application

Complete carriage for LAS-100 with two eccentric and two centric rollers for steel guide, felt wiper, cover and fastening set

Code: WPS-100
Weight: 4891 g

 

Set

1x WP-100-G
2x LRS-50-Z
2x LRS-50-E
2x AD-200

 

Note

Note:
Mounting holes are made according to customer requirements

Toothed belt-T10-32 mm

Application

Toothed belt T-10 32 mm wide, drive of linear axes

Code: ZR-T10-32-[length in mm]
Weight: 180 g/m
Material: plastic PU with steel strands