Connection technology

Application

90° connection of profiles

• 40×40: 1 pcs. V-40
• 40×80: 2 pcs. V-40
• 40×80: 2 pcs. V-40-E
• 80×80: 4 pcs. V-40-E

Material

Zinc die casting coated

Set V-40

2x IBS M6x18
1x V-40-G
1x LKS M8x25
2x NM-M6

Set V-40-E

1x IBS M6x18
1x V-40-G
1x LKS M8x25
1x NM-M6

*as V-40 and V-40-E, but with additional stainless steel connecting pin (VS-40/50)

Application

Fastening of surface elements and additional components

Code: W-35/25
Weight: 12 g

Material

Aluminum F25, natural anodized

Application

For vibration-free non-projecting connection under minimum forces,
e.g. rack or shelf construction for light to medium-heavy applications

Code: VL-40
Weight: 48 g

Material

Steel galvanized

Set

1x VL-40-G
1x VL-40-SKS
2x NM-M6 SPZ01
2x IBS-M6x14

Note

Not suitable for cantilever connections (only for closed frames); for load details, see technical notes at the end of this chapter.

Application

• 50×50: 1 pcs. V-50
• 50×100: 2 pcs. V-50 or V-50-E
• 100×100: 4 pcs. V-50-E

Material

Zinc die casting coated

Set V-50

2x IBS-M8x18
1x V-50-G
1x LKS-M10x30
2x NM-M8

Set V-50-E

1x IBS-M8x18
1x V-50-G
1x LKS-M10x35
1x NM-M8

*as V-50 and V-50-E, but with additional connecting pin

Connector-40 for steel groove profile

Application

90° connection of steel grooved profiles
Attention: With the help of the drilling template BS-40-ISZ, cross holes d=5.5 and 10 are placed

Code: V-40-S
Weight: 74 g

Material

Steel galvanized

Set

1x V-40-S-G
1x GE-40-SG
1x LKS-M8x20
1x LKS-M5x10

Application

Plate connector for 40×40 profiles; for attachment to BÖMA profiles

• Butt joint 40×40: 2 x AV-40
• Butt joint 40×80: 4 x AV-40
• Butt joint 80×80: 8 x AV-40
• 40×40 on flat surface: 1 x AV-40
• 40×80 on flat surface: 2 x AV-40
• 80×80 on flat surface: 4 x AV-40

Code: AV-40
Weight: 125 g

Material

Zinc casting coated

Set

1x AV-40-G
1x LKS-M8x25
2x IBS-M6x22
2x SKM-M6

Note

Connectors in different angles available on request.

Application

Plate connector for 20×40 profile; for attachment to BÖMA profiles

Code: AV-20×40
Weight: 53 g

Material

Aluminum natural anodized

Set

1x AV-20×40-G
2x IBS-M5x25
1x IBS-M6x20
2x ZS-4×14
1x NM-M6

Application

• 90° connection of 40×40-K curved profile to grid 40
• For plate attachment: lower diameter =9

Code: AV-40-K
Weight: 72 g

Material

Aluminum coated

Set

1x AV-40-KG
1x LKS-M8x25
1x IBS-M6x18
1x SPS-5×20
1x NM-M6

Application

Plate connector for 50×50 profiles; for attachment to BÖMA profiles

• Butt joint 50×50: 2 x AV-50
• Butt joint 50×100: 4 x AV-50
• Butt joint 100×100: 8 x AV-50
• 50×50 on flat surface: 1 x AV-50
• 50×100 on flat surface: 2 x AV-50
• 100×100 on flat surface: 4 x AV-50

Code: AV-50
Weight: 126 g

Material

Aluminum coated

Set

1x AV-50-G
1x SKS-M10x30
2x IBS-M8x18
1x SPS-8×20

Note

Connectors in different angles possible on request

Application

Construction of light doors up to approx. 1000 x 1000 mm;
corner connection of 20×40 profiles;
5 mm thick panel elements can be framed in the frame without reworking;
Size = clear dimension + 16 mm

Code: V-20×40
Weight: 83 g

Material

Aluminum natural anodized

Set

1x V-20×40-G
2x IBS-M5x18
2x ZS-4×14
2x V-20×40-AK

Corner connector-40 for curved profile 40×40-K

Application

Corner connection of three 40×40-K profiles

Code: V-40-K
Weight: 109 g

Material

• Zinc die casting
• Plastic PA-6 black

Set

1x V-40-KG
1x AK-40-K
3x LKS-M8x25

Application

• 90° angle connections between profiles
• Fastening plates and additional elements

Code: W-40/50
Weight: 196 g

Material

• Zinc die casting coated
• Steel investment casting
• Steel galvanized

Set

1x W-40/50-G
2x W-40/50-E
2x IBS-M8x16
2x NM-M8

Application

Stable 90° connections for profiles;
Transverse mounting only possible with 50 mm grid;

Code: W-100
Weight: 597 g

Material

• Zinc die casting coated
• Steel galvanized

Set

1x W-100-G
4x IBS-M8x20
4x NM-M8

Application

Stable 90° connections for profiles; attachment of solid panels;
Transverse mounting only possible with 50 mm grid;
Centering only possible on one side of the angle

Code: W-100-F
Weight: 524 g

Material

• Zinc die casting coated
• Steel galvanized

Set

1x W-100-GF
4x IBS-M8x20
2x NM-M8

Application

Stiffening of corner joints in 40 and 50 mm grids

Material

Steel galvanized

Application

Stiffening of T-joints in 40 and 50 mm grid

Material

Steel galvanized

Application

• Connection of profile frames preferably for protective fence construction
• Gap between 40 mm profiles 0 -10 mm incl. predetermined bending point in the middle of the panel

Code: VP-40
Weight: 132g

Material

Steel galvanized

Set

1x VP-40-G
2x NM-M8
2x IBS-M8x16

Connecting plate-40 captive with easy quick fixation

Application

Connecting plate with two locking screws for captive connections of elements and reduction of assembly times by fastening by means of 90° rotation incl. Allen screw M8x14 and swivel nut M8

Code: VP-40-UV-D
Weight: 131 g

Material

Steel galvanized

Connecting plate-40 captive with easy quick fixation

Application

Connecting plate with a locking screw for captive connections of elements and reduction of assembly times by fastening by means of 90° rotation incl. Allen screw M8x14 and swivel nut M8

Code: VP-40-UV-E
Weight: 111 g

Material

Steel galvanized

Application

• Slide nut with extremely high strength
• For insertion into the groove on the face side
• easily movable e.g. for adjusting devices

Material

Steel galvanized

Application

• Fixation of sliding panels
• Centering groove for customer-specific drilling on the underside

Code: SMS
Weight: 1108 g

Material

• Steel galvanized
• Bar length 1000 mm

Note

Drilling machining possible according to customer's drawing

Application

Frame connector 40 for the construction of 40 profile frames when using panel elements framed with KP-40/50

Code: RV-40
Weight: 31 g

Material

Steel galvanized

Set

1x RV-40-G
1x RV-40-S
2x GSS-M6x8

Note

Not suitable for cantilever connections (only for closed frames); for load details, see technical notes at the end of this chapter.

Application

Drill connector for fastening panel elements to 40/50 mm profiles

Material

Steel galvanized

Application

• Adjustable angle connection (-90° to +90°)
• Installation in 40 mm grid on face of profile
• Installation in 40 and 50 mm grid in the longitudinal groove
• Attachment to surfaces possible by breaking out the centerings

Material

Cast aluminum coated, aluminum natural, steel galvanized

Set

1x G-40-R
2x G-40-G
2x SKS-M8x16
2x SKS-M8x20
2x NM-M8

*as G-40, but with clamping lever (G-40-KH) instead of SKS-M8x16

Application

• Slotted nut for swiveling into 14 mm slots with finger or with BÖMA ED-Mx screwdriver
• Sliding in the groove with spring as locking device

Material

High strength steel galvanized

Set

1x NM-Mx-G
1x NM-F

Note

ED screwdriver for NM see index list

Application

• Connection of butt joints of profiles in 40 and 50 mm increments with obliquely drilled threads,
  to clamp profiles together
• Profile extension

Code: SV-40/50
Weight: 167 g

Material

Steel galvanized

Set

1x SV-40/50-G
6x GS-M8x12-S

Application

Thread insert for steel groove profile 40×40-S with M8x20 thread; attachment of plates and various attachments such as connector V-40, joint G-40, connection connector AV-40, drill connector BV-40-M8

Attention: With the help of the drilling template BS-40 a cross hole d=5.5 mm is set

Code: GE-40-S
Weight: 48 g

Material

Steel galvanized

Set

1x GE-40-SG
1x LKS-M5x10

Application

Auxiliary tool for easy insertion of the locknuts in all installation positions; Screw the locknut onto the insertion tool; Under slight pressure, swing it clockwise into the groove; Now the locknut is secured against rotation; Loosen the insertion tool by pulling it slightly counterclockwise.

Material

• Plastic PAS - black
• Steel galvanized