From profile frames to special machines
The perfect basis for simple and ingenious designs.
From simple profile frames to complex special machines.
Do you want to import our products into your CAD system?
On Traceparts you can easily download our products as 3D models.
Connection technology
Part 1/3
- Connector V-40
- Angle W-35/25
- Connector light VL-40
- Connector V-50
- Connector V-40-S
- Connector AV-40
- Connector AV-20x40
- Connector AV-40-K
- Connector AV-50
- Corner connector V-20x40
- Corner connector V-40-K
- Angle W-40/50
- Angle W-100
- Angle flat W-100-F
Application
90° connection of profiles
- 40×40: 1 pcs. V-40
- 40×80: 2 pcs. V-40
- 40×80: 2 pcs. V-40-E
- 80×80: 4 pcs. V-40-E
Material
Zinc die casting coated
Set V-40
2x IBS M6x18
1x V-40-G
1x LKS M8x25
2x NM-M6
Set V-40-E
1x IBS M6x18
1x V-40-G
1x LKS M8x25
1x NM-M6
Code: | Weight: |
V-40 | 143 g |
V-40-E | 129 g |
V-40-L* | 153 g electrically conductive |
V-40-LE* | 139 g electrically conductive |
*as V-40 and V-40-E, but with additional stainless steel connecting pin (VS-40/50)
Application
Fastening of surface elements and additional components
Code: W-35/25
Weight: 12 g
Material
Aluminum F25, natural anodized
Application
For vibration-free non-projecting connection under minimum forces,
e.g. rack or shelf construction for light to medium-heavy applications
Code: VL-40
Weight: 48 g
Material
Steel galvanized
Set
1x VL-40-G
1x VL-40-SKS
2x NM-M6 SPZ01
2x IBS-M6x14
Note
Not suitable for cantilever connections (only for closed frames); for load details, see technical notes at the end of this chapter.
Application
- 50×50: 1 pcs. V-50
- 50×100: 2 pcs. V-50 or V-50-E
- 100×100: 4 pcs. V-50-E
Material
Zinc die casting coated
Set V-50
2x IBS-M8x18
1x V-50-G
1x LKS-M10x30
2x NM-M8
Set V-50-E
1x IBS-M8x18
1x V-50-G
1x LKS-M10x35
1x NM-M8
Code: | Weight: |
V-50 | 219 g |
V-50-E | 198 g |
V-50-L* | 223 g electrically conductive |
V-50-LE* | 202 g electrically conductive |
*as V-50 and V-50-E, but with additional connecting pin
Connector-40 for steel groove profile
Application
90° connection of steel grooved profiles
Attention: With the help of the drilling template BS-40-ISZ, cross holes d=5.5 and 10 are placed
Code: V-40-S
Weight: 74 g
Material
Steel galvanized
Set
1x V-40-S-G
1x GE-40-SG
1x LKS-M8x20
1x LKS-M5x10
Application
Plate connector for 40×40 profiles; for attachment to BÖMA profiles
- Butt joint 40×40: 2 x AV-40
- Butt joint 40×80: 4 x AV-40
- Butt joint 80×80: 8 x AV-40
- 40×40 on flat surface: 1 x AV-40
- 40×80 on flat surface: 2 x AV-40
- 80×80 on flat surface: 4 x AV-40
Code: AV-40
Weight: 125 g
Material
Zinc casting coated
Set
1x AV-40-G
1x LKS-M8x25
2x IBS-M6x22
2x SKM-M6
Note
Connectors in different angles available on request.
Application
Plate connector for 20×40 profile; for attachment to BÖMA profiles
Code: AV-20×40
Weight: 53 g
Material
Aluminum natural anodized
Set
1x AV-20×40-G
2x IBS-M5x25
1x IBS-M6x20
2x ZS-4×14
1x NM-M6
Application
- 90° connection of 40×40-K curved profile to grid 40
- For plate attachment: lower diameter =9
Code: AV-40-K
Weight: 72 g
Material
Aluminum coated
Set
1x AV-40-KG
1x LKS-M8x25
1x IBS-M6x18
1x SPS-5×20
1x NM-M6
Application
Plate connector for 50×50 profiles; for attachment to BÖMA profiles
- Butt joint 50×50: 2 x AV-50
- Butt joint 50×100: 4 x AV-50
- Butt joint 100×100: 8 x AV-50
- 50×50 on flat surface: 1 x AV-50
- 50×100 on flat surface: 2 x AV-50
- 100×100 on flat surface: 4 x AV-50
Code: AV-50
Weight: 126 g
Material
Aluminum coated
Set
1x AV-50-G
1x SKS-M10x30
2x IBS-M8x18
1x SPS-8×20
Note
Connectors in different angles possible on request
Application
Construction of light doors up to approx. 1000 x 1000 mm;
corner connection of 20×40 profiles;
5 mm thick panel elements can be framed in the frame without reworking;
Size = clear dimension + 16 mm
Code: V-20×40
Weight: 83 g
Material
Aluminum natural anodized
Set
1x V-20×40-G
2x IBS-M5x18
2x ZS-4×14
2x V-20×40-AK
Corner connector-40 for curved profile 40×40-K
Application
Corner connection of three 40×40-K profiles
Code: V-40-K
Weight: 109 g
Material
- Zinc die casting
- Plastic PA-6 black
Set
1x V-40-KG
1x AK-40-K
3x LKS-M8x25
Application
- 90° angle connections between profiles
- Fastening plates and additional elements
Code: W-40/50
Weight: 196 g
Material
- Zinc die casting coated
- Steel investment casting
- Steel galvanized
Set
1x W-40/50-G
2x W-40/50-E
2x IBS-M8x16
2x NM-M8
Application
Stable 90° connections for profiles;
Transverse mounting only possible with 50 mm grid;
Code: W-100
Weight: 597 g
Material
- Zinc die casting coated
- Steel galvanized
Set
1x W-100-G
4x IBS-M8x20
4x NM-M8
Application
Stable 90° connections for profiles; attachment of solid panels;
Transverse mounting only possible with 50 mm grid;
Centering only possible on one side of the angle
Code: W-100-F
Weight: 524 g
Material
- Zinc die casting coated
- Steel galvanized
Set
1x W-100-GF
4x IBS-M8x20
2x NM-M8
Connection technology
Part 2/3
- Gusset plate KNB-40/50-x
- Gusset KNBD-40/50-x
- Connection plate VP-40
- Connection plate VP-40-UV-D
- Connection plate VP-40-UV-E
- Sliding nut SM-Mx
- Sliding nut bar SMS
Application
Stiffening of corner joints in 40 and 50 mm grids
Material
Steel galvanized
Code: | Width: | Height: | Weight: |
KNB-40/50-150 | 150 | 150 | 497 g |
KNB-40/50-250 | 250 | 250 | 1241 g |
Application
Stiffening of T-joints in 40 and 50 mm grid
Material
Steel galvanized
Code: | Width: | Height: | Weight: |
KNBD-40/50-150 | 250 | 150 | 790 g |
KNBD-40/50-250 | 450 | 250 | 2145 g |
Application
- Connection of profile frames preferably for protective fence construction
- Gap between 40 mm profiles 0 -10 mm incl. predetermined bending point in the middle of the panel
Code: VP-40
Weight: 132g
Material
Steel galvanized
Set
1x VP-40-G
2x NM-M8
2x IBS-M8x16
Connecting plate-40 captive with easy quick fixation
Application
Connecting plate with two locking screws for captive connections of elements and reduction of assembly times by fastening by means of 90° rotation incl. Allen screw M8x14 and swivel nut M8
Code: VP-40-UV-D
Weight: 131 g
Material
Steel galvanized
Connecting plate-40 captive with easy quick fixation
Application
Connecting plate with a locking screw for captive connections of elements and reduction of assembly times by fastening by means of 90° rotation incl. Allen screw M8x14 and swivel nut M8
Code: VP-40-UV-E
Weight: 111 g
Material
Steel galvanized
Application
- Slide nut with extremely high strength
- For insertion into the groove on the face side
- easily movable e.g. for adjusting devices
Material
Steel galvanized
Code: | Weight: |
SM-M6 | 25 g |
SM-M8 | 24 g |
SM-M10 | 23 g |
Application
- Fixation of sliding panels
- Centering groove for customer-specific drilling on the underside
Code: SMS
Weight: 1108 g
Material
- Steel galvanized
- Bar length 1000 mm
Note
Drilling machining possible according to customer's drawing
Connection technology
Part 3/3
- Frame connector RV-40
- Drill connector BV-Mx
- Joint G-40
- Slotted nut NM-Mx
- Butt joint SV-40/50
- Thread insert GE-40-S
- ED-Mx screwdriver
Application
Frame connector 40 for the construction of 40 profile frames when using panel elements framed with KP-40/50
Code: RV-40
Weight: 31 g
Material
Steel galvanized
Set
1x RV-40-G
1x RV-40-S
2x GSS-M6x8
Note
Not suitable for cantilever connections (only for closed frames); for load details, see technical notes at the end of this chapter.
Application
Drill connector for fastening panel elements to 40/50 mm profiles
Material
Steel galvanized
Code: | Weight: | Diameter for key: |
BV-M8 | 16 g | 7 |
1 x LKS-M8x25 | ||
1 x O-ring |
Code: | Weight: | Diameter for key: |
BV-M10 | 25 g | 9 |
1 x LKS-M10x30 | ||
1 x O-ring |
Application
- Adjustable angle connection (-90° to +90°)
- Installation in 40 mm grid on face of profile
- Installation in 40 and 50 mm grid in the longitudinal groove
- Attachment to surfaces possible by breaking out the centerings
Material
Cast aluminum coated, aluminum natural, steel galvanized
Set
1x G-40-R
2x G-40-G
2x SKS-M8x16
2x SKS-M8x20
2x NM-M8
Code: | Weight: |
G40 | 219 g |
G-40-K* | 270 g |
*as G-40, but with clamping lever (G-40-KH) instead of SKS-M8x16
Application
- Slotted nut for swiveling into 14 mm slots with finger or with BÖMA ED-Mx screwdriver
- Sliding in the groove with spring as locking device
Material
High strength steel galvanized
Set
1x NM-Mx-G
1x NM-F
Code: | Weight: |
NM-M4 | 10 g |
NM-M5 | 9 g |
NM-M6 | 9 g |
NM-M8 | 8 g |
Note
ED screwdriver for NM see index list
Application
- Connection of butt joints of profiles in 40 and 50 mm increments with obliquely drilled threads,
to clamp profiles together - Profile extension
Code: SV-40/50
Weight: 167 g
Material
Steel galvanized
Set
1x SV-40/50-G
6x GS-M8x12-S
Application
Thread insert for steel groove profile 40×40-S with M8x20 thread; attachment of plates and various attachments such as connector V-40, joint G-40, connection connector AV-40, drill connector BV-40-M8
Attention: With the help of the drilling template BS-40 a cross hole d=5.5 mm is set
Code: GE-40-S
Weight: 48 g
Material
Steel galvanized
Set
1x GE-40-SG
1x LKS-M5x10
Application
Auxiliary tool for easy insertion of the locknuts in all installation positions; Screw the locknut onto the insertion tool; Under slight pressure, swing it clockwise into the groove; Now the locknut is secured against rotation; Loosen the insertion tool by pulling it slightly counterclockwise.
Material
- Plastic PAS - black
- Steel galvanized
Code: | Weight: |
ED-M4/M5 | 9 g |
ED-M6/M8 | 10 g |